Filter By
UAV motors for agricultural platforms have to run long cycles in dust and spray. This range covers spraying and industrial multirotors with high-torque brushless motors on 6S to 12S.
Agricultural Spraying Drone Motors
A spraying drone carries a tank, a pump and a wide swath. The motors are sized for continuous load rather than peak thrust, so heat and bearing life matter most.
Torque, KV and Propeller Selection
Agricultural platforms run 380 to 650KV with large, low-pitch propellers. Lower KV keeps current and temperature down during long spraying passes.
Dust, Spray and Water Protection
The motor is usually the least protected part of the airframe. Sealed bearings and coated windings extend service life in spray conditions.
ESC and Power System Matching
Size the ESC above the maximum current in the thrust table and check the continuous rating of the pack at hover throttle.
OEM and Bulk Supply
Custom KV, shafts, cables and connectors are available for agricultural and industrial orders.
Frequently asked questions
What motor for an agricultural drone?
A high-torque motor in the 380 to 650KV range on 6S to 12S, matched to a large low-pitch propeller.
How much thrust to lift a 10kg payload?
Plan for about 20kg of total thrust, so 5kg per motor on a quadcopter.
Are your motors waterproof?
We supply sealed bearings and coated windings; specify the protection level you need when ordering.
Do you supply UAV motors in bulk?
Yes, with sample validation and repeat bulk supply.
Related guides
7-Inch vs 9-Inch Long-Range Drone Motors
Popular models in this range
T5330 220KV | X4108 380KV | 4215 650KV
Browse related ranges
all drone motors | cinelifter and heavy-lift motors
More guides: Outrunner vs Inrunner Brushless Motors | Brushless vs Brushed Motors for Drones
