TMO5208 Sensored Slip-Ring Brushless Gimbal Motor for High-End Aerial Photography
THE BENEFITS OF CHOOSING US
Description
The TMO5208 is a sensored (hall-sensor) brushless gimbal motor with a built-in slip-ring, built for high-end aerial photography gimbals, cinema rigs and DSLR camera stabilizers. The 5208 stator (63 mm OD x 24.5 mm) and low 25KV wind give the smooth, high-holding-torque response a professional gimbal controller needs.
Key specifications
| Parameter | Value |
|---|---|
| Model | TMO5208 (GBM5208H-200T) |
| Stator size | 53 mm (OD) x 8 mm; motor 63 mm (OD) x 24.5 mm |
| KV | 25 |
| Voltage range | 3-6S Lipo |
| Max current / power | 10A / 218W |
| No-load current | 0.066A |
| Stall torque | 0.368 N.m / V (3S) |
| Shaft bore (inner) | 12.6 mm |
| Shaft diameter | 15 mm |
| Weight (with wires) | 198.3 g |
Sensored with slip-ring
The hall sensors give precise rotor position feedback for smooth low-speed control, and the slip-ring carries power and signal across the rotating gimbal axis — no more cable twisting on 360° pan moves. That makes this motor a direct fit for high-end 3-axis gimbals carrying DSLR and cinema cameras.
Compatible builds
Pairs with professional 3-axis gimbal controllers and DSLR / cinema camera rigs on multirotor and handheld stabilizer platforms. Use with a 3-6S Lipo and a controller rated for the 10A peak.
Custom options
Wire length, connector type and shaft options can be customized for OEM and ODM orders. Samples and bulk supply are available.
Frequently asked questions
What makes the TMO5208 different from a standard gimbal motor?
It adds hall-sensor position feedback and a built-in slip-ring, so it can handle 360° continuous pan without cable twist while keeping smooth low-speed control.
What cameras can it carry?
It is sized for DSLR and cinema-class cameras on high-end 3-axis gimbals.
What voltage should I run?
3-6S Lipo; the motor delivers 0.368 N.m/V stall torque at 3S.
Can I get custom wire or shaft options?
Yes — wire length, connectors and shaft options are customizable for OEM and ODM orders.
Do you offer samples?
Yes, samples are available for validation before bulk orders.
This product is intended for lawful use only (aerial photography, agriculture, industrial inspection, education, and recreational FPV / RC applications). Please check and comply with all applicable local, national, and international laws and regulations in your country/region before purchase and use, including drone, aviation, export, and import regulations.
By purchasing, you confirm the product will be used for legal purposes only. Yadovex reserves the right to decline orders that we believe may be used for prohibited purposes. For our full policy, see our Disclaimer and Compliance & Export Control Policy.
Related models and guides
Related models: TM2608 70T Gimbal Motor | BE8108 100KV Motor
Browse: Gimbal Motors | Brushless Motors
Read: Outrunner vs Inrunner
Frequently asked questions
What makes the TMO5208 different from a standard gimbal motor?
It adds hall-sensor position feedback and a built-in slip-ring for 360° continuous pan without cable twist, plus smooth low-speed control.
What cameras can it carry?
It is sized for DSLR and cinema-class cameras on high-end 3-axis gimbals.
What voltage should I run?
3-6S Lipo; stall torque is 0.368 N.m/V at 3S.
Can I get custom wire or shaft options?
Yes — wire length, connectors and shaft options are customizable for OEM and ODM orders.
Do you offer samples?
Yes, samples are available for validation before bulk orders.
Related products in this range
TM4108 130T Hollow-Shaft Outrunner BLDC Gimbal Motor for Aerial Photography Drones
Additional information
| pa_model | TMO5208 |
|---|---|
| pa_motor-size | 5208 |
| pa_kv | 25KV |
| pa_shaft-bore | 12.6mm |
| pa_weight | 198.3g |
Reviews
There are no reviews yet.